Hex Print ModeA hex code printout (or hex dump) translates all incoming data to hexadecimalequivalents. A hex dump lists each ASCII data character received from the hostcomputer, together with its corresponding two-digit hexadecimal code. Hex dumpscan be used to troubleshoot some types of printer data reception problems.v Disable (the default)v EnableRefer to page 227 to obtain a hex code printout.Note: Printing in Hex Mode may alter print attributes set at the operator panel orby the host computer. These attributes may need to be reset after exitingHex Print Mode. The mode is not available when printing IPDS.Power On StateThis parameter allows you to configure the printer to power on in the READY orNOT READY mode.v Ready (the default)v Not ReadyPaper Jam DetectionThis parameter determines whether or not paper jam detection is active.v Enable (the default). Detects paper jams.v Disables. Disables paper jam checking to prevent false errors.Attention: When paper jam detection is disabled, the printer does not monitorpaper motion. If a paper jam occurs, the printer ignores the condition andcontinues to print, possibly causing severe damage to the printer.Forms SpeedFORMS SPEED affects the speed at which paper moves into the stacking area ofthe printer.v Normal Speed (the default) will slew and stack paper, such as single-sheet dataprocessing paper, at maximum speed.v Slow Speed will slew and stack at a slower pace. This ensures that forms, suchas multiple-sheet (that is, invoice), will stack more neatly.58 Infoprint 6500 User’s Manual
