Parker HannifinP Series User Guide 106 Physical outputs descriptionsBit Description0 to 15 Reserved16 Forced output of DO#1(I/O pin 35, 36)(0:OFF, 1:ON)Provided that the relevant bit mask (0x60FE:02.16) is set to 117 Forced output of DO#1(I/O pin 37, 38) (0:OFF, 1:ON)Provided that the relevant bit mask (0x60FE:02.17) is set to 118 Forced output of DO#1(I/O pin 39, 40) (0:OFF, 1:ON)Provided that the relevant bit mask (0x60FE:02.18) is set to 119 Forced output of DO#1(I/O pin 41, 42) (0:OFF, 1:ON)Provided that the relevant bit mask (0x60FE:02.19) is set to 120 Forced output of DO#1(I/O pin 43, 44) (0:OFF, 1:ON)Provided that the relevant bit mask (0x60FE:02.20) is set to 121 Forced output of DO#1(I/O pin 45, 46) (0:OFF, 1:ON)Provided that the relevant bit mask (0x60FE:02.21) is set to 122 Forced output of DO#1(I/O pin 47, 48) (0:OFF, 1:ON)Provided that the relevant bit mask (0x60FE:02.22) is set to 123 Forced output of DO#1(I/O pin 49, 50) (0:OFF, 1:ON)Provided that the relevant bit mask (0x60FE:02.23) is set to 124 DO #1output status (0:OFF, 1:ON)25 DO #2output status (0:OFF, 1:ON)26 DO #3 output status (0:OFF, 1:ON)27 DO #4output status (0:OFF, 1:ON)28 DO #5output status (0:OFF, 1:ON)29 DO #6output status (0:OFF, 1:ON)30 DO #7output status (0:OFF, 1:ON)31 DO #8output status (0:OFF, 1:ON)Table 62. Physical Output Descriptions Bit mask descriptionsBit Descriptions0 to 15 Reserved16 DO#1(I/O pin 35, 36)output status setting (0:Disable, 1:Enable)17 DO#2(I/O pin 37, 38)output status setting (0:Disable, 1:Enable)18 DO #3(I/O pin 39, 40)output status setting (0:Disable, 1:Enable)19 DO #4(I/O pin 41, 42)output status setting (0:Disable, 1:Enable)20 DO#1(I/O pin 43, 44)output status setting (0:Disable, 1:Enable)21 DO#2(I/O pin 45, 46)output status setting (0:Disable, 1:Enable)22 DO #3(I/O pin 47, 48)output status setting (0:Disable, 1:Enable)23 DO #4(I/O pin 49, 50)output status setting (0:Disable, 1:Enable)24 to 31 ReservedTable 63. Bit Mask Descriptionswww.comoso.com
