8-14 Frame Relay Module 4.0 User Guide, Rev 01Configuring Logical X.25 PortsTo display all logical ports configured on the FRM, press [A], [D], [E], [A] from theMain Menu. This will display a list of all PVCs and logical ports.To configure a logical port, press [A] (Configuration), then [C] (Configure Ports), then[D] from the Main Menu. When prompted, enter:l RLP containing the port: 0–2. (The default is 0.) (RLP locations are shown inFigure 6-1.)l Frame Relay Port: 0–7. (The default is 0.) (Port locations are shown inFigure 6-2.)l Logical Port: 8–63. (The default is 8.)The display for an existing port will show the configured parameter values, while thedisplay for a new port will contain default database values, shown in the followingfigure.Figure 8-5 Logical Port Screen 1[A],[C],[D] from Main MenuThere are four Logical Port screens. Selecting the entry X.25 Logical Port - Screen "n"at each of the first three screens will display the next screen, and pressing [F3] willdisplay the previous screen.Any menu items preceded by asterisks instead of letters cannot be changed. These aredisplayed only because the software code for the menu is shared with physical portconfiguration.If you want to configure one or more closed user groups (CUGs) for the port, press [N]at the third screen. (Otherwise, you do not need to configure anything on the fourthscreen.)Node N ame=node_xyzLogical Port Parameters (s creen 1 of 4)* RLP: 0 Port: 0 Logical Port: 8* I/O: V .35 Databas eA Mapped DLC I N umber 16B Block ed Port Flag NC Con nection Priority 0D Band width Allocation Group 0E Encaps ulation Method RFC1490F Modulo 0 Modulo 8G Maximu m LA PB Win dow Size 7H N2 Retransmit C ount 20I T1 Retran smit Period (msec) 3000J T2 Wait Ack Period (msec) 1000K T3 Lin k A live Period (sec) 5L Logical DCE YM X.25 Logical Port - S creen 2Op tion :
