Configuring IPX 14-17IPX RIP Static Route Parameters1 The highest interface in the IPX Interface file.Networkis the IPX network address of the network containing the node defined by NodeNumber.Hopsis the number of routers in a packet's path to the destination network.Transport Timeis the time (in 55-millisecond units) that it will normally take a packet to reach the des-tination network if this route is used.RouterIs the hex value of the node address of the router that will forward a packet when thisroute is used. If Novell's IPXWAN protocol is used on the interface (as configured inthe IPX Interface file, described earlier in this chapter), this field will be ignored.Interfaceis the IPX network number assigned to the interface used to send packets that are usingthis route.IPX SAP Static Route ParametersTable 14-10 IPX RIP Static Route ParametersParameter Valid Values Default ValueNetwork 1–fffffffe (4 bytes) 00000001Hops 0–65535 1Transpor t Time 0–65535 1Router 0–fffffffffffe (6 bytes) 000000000001Interface 0– note 1 0Table 14-11 IPX SAP Static Route ParametersParameter Valid Values Default ValueService Type 0–65535 0Server Name 1-48 characters asterisk (wildcard)Server Network Address 1–fffffffe (4 bytes) 00000001Server Node Address 1–fffffffffffe (6 bytes) 000000000001Server Socket Number 0–ffff 0000Intervening Networks 1–65535 1Router 1–fffffffffffe (6 bytes) 000000000001Interface 0–65535 0
