Configuring IPX 14-5IPX Filter ParametersThe four types of IPX filters are listed in separate tables:l RIP filters – see Table 14-2.l SAP filters – see Table 14-3.l Packet filters – see Table 14-4.l RIP Router filters – see Table 14-5.Explanations of some parameters follow the tables. Explanations of individual masksare not included below because they were described in general under "How FilterMasks Work" on page 14-4.Filter Namehelps the user identify the filter. The name is not used by the software.Network Address Valueis a number assigned to the local network.Filter Namehelps the user identify the filter. The name is not used by the software.Table 14-2 IPX RIP Filter ParametersParameter Valid Values Default ValueFilter Name 1–31 characters noneNetwork Address Value 0–ffffffff (4 bytes) ffffffffNetwork Address Mask 0–ffffffff (4 bytes) ffffffffTable 14-3 IPX SAP Filter ParametersParameter Valid Values Default ValueFilter Name 1–31 characters noneService Type Value 0–ffff (2 bytes) ffffService Type Mask 0–ffff (2 bytes) ffffServer Name 1–47 characters asterisk (wildcard)Networ k Address Value 0–ffffffff (4 bytes) ffffffffNetwork Address Mask 0–ffffffff (4 bytes) ffffffffNode Address Value 0–ffffffffffff (6 bytes) ffffffffffffNode Address Mask 0–ffffffffffff (6 bytes) ffffffffffffSocket Addr ess Value 0–ffff (2 bytes) ffffSocket Address Mask 0–ffff (2 bytes) ffff
