8-32 Frame Relay Module 4.0 User Guide, Rev 01received. The packet matches Template ID 3110*U??; therefore, a translationoccurs as follows:u User data 99 from the packet is appended to the called address311012345678.The translated called address is 31101234567899.Testing a Translation TemplatePress [C] at the X.25 Address Translation Templates Menu ([A], [C], [C], [C] from theMain Menu) to test a translation template you have created.When prompted, enter:l RLP: 0–2. (The default is 0.)l Port: 0–7. (The default is 0.)l Direction: I (incoming) or O (outgoing). (The default is I.)l Called address to be translated.l Calling address to be translated.l Facility length + facility + user data. (The user data includes four bytes for pro-tocol ID, which must be entered as a hex string.) To specify only user data, atthe above prompt enter 00 for a facility length, nothing for a facility, then thedesired user data, including the 4-byte protocol ID.After you enter this information, the FRM creates a test packet and sends it throughthe translation process, and displays the results, as shown in the following example.Figure 8-11 Address Translation Test Screen[A],[C],[C],[C] from Main MenuN ode Name=n odexyzPacket Trans lation Tes tPort:0 Direction :IncomingOriginal Packet: 10010B7712345673333333000100000035353535C alled Add ress : 1234567 C alling A ddress: 3333333U ser Data Protocol ID : 01000000 U ser Data: 55555Facilities:Trans lation Template:Template I D: 1234C *U*C alled Add ress : L8401X 7 C alling A ddress: PU ser Data Protocol ID : P U ser Data: PFacilities: PTrans lated Pack et: 10010B74840133333330000100000035353535C alled Add ress : 8401 C alling A ddress: 3333333U ser Data Protocol ID : 01000000 U ser Data: 55555Facilities:S trike any k ey to continu e
