20-10 Frame Relay Module 4.0 User Guide, Rev 01Bridge Port StatisticsPress [A] at the Bridge Status Displays Menu to display the configurational and oper-ational status of all Bridge ports in the node:Figure 20-8 Bridge Port Status Display[C],[F],[D],[A] from Main MenuTo display statistics for the Bridge ports on the above screen, press [F2]. Pressing[PgUp] or [PgDn] will display other statistics screens (if there are more), and pressing[F2] will return the display to Figure 20-8.Bridge Status Displays are described on page 19-21.Information on the Bridge Port Statistics Display:l Type/Format – identifies the interface type (LAN or frame relay) and (if framerelay) frame format (Native LLC2 or 8023_TB, as configured in the Portrecord).l DesignatedRoot – is the bridge selected as Root in the spanning tree. Theselection of root is determined by the bridge with the lowest Bridge ID, whichconsists of a Bridge Priority and MAC address.l DesignatedBridge – is the bridge connecting to the least-cost path to the rootbridge.l DlyExceeded – is the number of frames discarded because of excessive delay.l OutFrames – is the number of transmitted frames.l InCfgShort – is the number of received Configuration BPDUs (Bridge ProtocolData Units) that were dropped because they were too short.l OutCfgBPDU – is the number of transmitted Configuration BPDUs.N ode Name=n ode_xyzBridge Port S tatus DisplayBridge I d: 0010.00000364439B Root Port: 255Nu m Type/Format Statu s Bridge State R eceive X mit0 Ethern et Active D is abled 4294967296 42949672961 Token R in g Active Listening 4675561234 46755612342 Frm/Nat LLC 2 Active Learning 4561230000 45622221003 Frm/8023/TB Active Blocking 4561231100 4561231100PgUp PgDn F2:More In fo F3:Exit