Configuring IPX 14-11X.25 Interface Parameters1 Valid LAN interface depends on hardware model. Default value is Ethernet or 802.5(depending on hardware) for Interface 0, and FRL for Interface 1–63.2 If set to greater than 0 (see note 4), RIP Age Timer must be 3 times longer than PeriodicRIP Timer, and SAP Age Timer must be 3 times longer than Per iodic SAP Timer.3 A value of 0 disables aging.4 The addresses specified here must also be configured in Subscriber records, with certainrequirements. These are described on page 8-21.Table 14-8 IPX X.25 Interface ParametersParameter Valid Values Default ValueBlocked Port Flag Y/N NInterface Type X.25 Depends on inter-face number 1Fr ame Type TYPE_II TYPE_IIMaximum Tr ansmission Unit (frame size) 31–4096 (bytes) 4096IPX Network Address 1–fffffffe 00000000Priority 0–9 5Bandwidth Allocation Group 1–16 1Port Diagnostics Enabled Y/N NNetBIOS Enabled Y/N NNetBIOS Hops 0–255 8Periodic RIP Enabled Y/N NPeriodic RIP Timer (seconds) 1–65535 2 60Periodic SAP Enabled Y/N NPeriodic SAP Timer (seconds) 1–65535 2 60RIP Enabled Y/N NRIP Age Tim er (seconds) 0–65535 2,3 180RIP Maximum Size (bytes) 54–446 446SAP Enabled Y/N NSAP Age Timer (seconds) 0–65535 2,3 180Tr ansport Time (55ms ticks) 1–255 1Serialization Enabled Y/N NWatchdog Spoofing Enabled Y/N NIPXWAN Enabled Y/N NSource Subscriber valid subscriber address 4 noneDestination Subscriber valid subscriber address 4 noneSVC Retry Timer (seconds) 5–60 20SVC Idle Timer (minutes) 0–5 1Max VCs to Establish 1–8 1PVC Connection Y/N N
