9-26 Frame Relay Module 4.0 User Guide, Rev 01Configuring LLC2 InterfacesLLC2 Interfaces records define the types and locations of the interfaces that will carryLLC2 traffic to or from an FRM.To display configured interfaces, press [C] at the IP/LLC2/BRIDGE.IPX InterfacesConfiguration Menu:Figure 9-9 LLC2 Interfaces Display[A],[C],[E],[C] from Main MenuThese interfaces can be used for either LLC2 or Bridging.To configure an interface, press [D] at the LAN Interfaces Configuration Menu. Whenprompted for an interface number (which is merely a sequential number to identify theinterface):l If modifying an existing record, enter the interface number: 0–95.l If creating a new record, press [Enter], which will automatically specify the nextavailable sequential interface number.The display depends on the interface type. Examples are shown in the following twofigures.N ode Name=n odexyzR eview Bridge Ports/LLC-2 Interfaces----------------------------------------------------------------------------------------------------------------------I nterface N umberType RLP Port D LCI Format-----------------------------------------------------------------------------------------------------------------------1 Ethern et2 Frame R elay 0 1 30 N ative LLC-23 Frame R elay 0 1 31 8025_S RB4 Frame R elay 0 1 32 8025_S RB5 Frame R elay 0 1 33 8023_TBPgUp , PgD n, F3:Exit, F9:Stop R emote, F10:Ab ort