20-2 Frame Relay Module 4.0 User Guide, Rev 01l Retransmitted frames per sec (*10) – is the number of frames retransmitted by theRLP per second over the five-second reporting interval, multiplied by 10. If thevalue is consistently greater than zero and there are no other problems, youshould increase the T1 timer (Retransmission Period) in the Port record.Configuring RLP Statistics ThresholdsFor each RLP statistic, you can specify a threshold that, when crossed, causes an alarmto be sent to the collecting node.Press [A] at the Statistics Menu. When prompted, enter:l Statistic level: L for RLP.l RLP: 0 on FRM/2/3, 0–2 on FRM. (Default is 0.)A menu similar to the following figure will be displayed.Figure 20-2 RLP Statistics Configuration Menu[E],[A] from Main MenuChanging a threshold changes the database value. Press [F7] to write thechange to system memory.A threshold is either a number or a percentage, depending on the statistic. The validrange for any statistic is 0–65535. (Default = 0.) When the measured value for the sta-tistic crosses the threshold (in either direction), an alarm is generated.Nod e Name=n ode_xyzR LP Statistics (Th resh old s)R LP: 0Datab ase Sys tem MemoryA Percentage of Buffers in Us e 0 0B Numb er of Queued Mess ages 0 0C Received frames/Sec (*10) 0 0D Tran smitted frames/Sec (*10) 0 0E Rejected frames/Sec (*10) 0 0F Retran smitted Frames /S ec (*10)Option: