v “Solving power problems” on page 197v “Installing power supplies” on page 104806f0a07-0303ffff [ProcessorElementName] is operating in a Degraded State.Explanation: The microprocessor 3 is being throttled due to thermal or power conditions.May also be shown as 806f0a070303ffff or 0x806f0a070303ffffSeverity: WarningAlert Category: Warning - CPUServiceable: YesCIM Information: Prefix: PLAT and ID: 0038SNMP Trap ID: 42Automatically notify Support: NoUser response: Check the IMM event log for any fan, cooling, or power related issues.For a thermal condition:1. Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are in place andcorrectly installed.2. Make sure that the room temperature is within operating specifications.For a power condition:1. If Power Supply Unit is rated 1400 Watt, Make sure it is connected to 220V AC input2. If using a 900 Watt rated power supply (connected at either 110V or 220 V ), may need to upgrade to a 1400 Wattrated power supply (connected at 220V).Related Links:v “Server features and specifications” on page 7v “Solving power problems” on page 197v “Installing power supplies” on page 104806f0a07-0304ffff [ProcessorElementName] is operating in a Degraded State.Explanation: The microprocessor 4 is being throttled due to thermal or power conditions.May also be shown as 806f0a070304ffff or 0x806f0a070304ffffSeverity: WarningAlert Category: Warning - CPUServiceable: YesCIM Information: Prefix: PLAT and ID: 0038SNMP Trap ID: 42Automatically notify Support: NoUser response: Check the IMM event log for any fan, cooling, or power related issues.For a thermal condition:1. Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are in place andcorrectly installed.2. Make sure that the room temperature is within operating specifications.For a power condition:1. If Power Supply Unit is rated 1400 Watt, Make sure it is connected to 220V AC input806f0a07-0303ffff • 806f0a07-0304ffffAppendix B. Integrated management module II (IMM2) error messages 1161
