v Menu-driven setup, system configuration, and redundant array of independentdisks (RAID) configuration programsv Microprocessor built-in self-test (BIST), internal error signal monitoring, internalthermal trip signal monitoring, configuration checking, and microprocessor andvoltage regulator module failure identification through light path diagnosticsv Nonmaskable interrupt (NMI) buttonv Operating system memory on-lining (capacity change)v Parity checking on the PCIe busesv PCIe hot-add and remove supportv PCIe hot-plug (microprocessor 2 and 3 only)v Power management: compliance with Advanced Configuration and PowerInterface (ACPI)v Power-on self-test (POST)v Predictive Failure Analysis (PFA) alerts on memory, SAS/SATA hard disk drivesor solid state drives, and fans.v Redundant Ethernet capabilities with failover supportv Redundant hot-swap power supplies and redundant hot-swap fansv Redundant network interface card (NIC) supportv Remind button to temporarily turn off the system-error LEDv Remote system problem-determination supportv ROM-based diagnostics and upgrade of flash ROM-based code and diagnosticsv ROM checksumsv Serial Presence Detection (SPD) on memory, VPD on system board, powersupply, and hard disk drive or solid state drive backplanes, microprocessor andmemory expansion tray, and Ethernet adaptersv Single-DIMM isolation of excessive correctable error or multi-bit error by theUnified Extensible Firmware Interface (UEFI)v SMI clock failoverv SMI lane failoverv SMI packet retryv Solid-state drivesv Standby voltage for systems-management features and monitoringv Startup (boot) from LAN through remote initial program load (RIPL) or dynamichost configuration protocol/boot protocol (DHCP/BOOTP)v System auto-configuring from the configuration menuv System-error logging (UEFI/POST and IMM)v Systems-management monitoring through the Inter-Integrated Circuit (I2C)protocol busv Temperature and fan monitoringv Uncorrectable error (UE) detectionv Upgradeable POST, Unified Extensible Firmware Interface (UEFI), diagnostics,IMM firmware, and read-only memory (ROM) resident code, locally or over theLANv Vital product data (VPD) on the microprocessor and memory expansionmodules, PCIe expansion modules, base I/O module, storage and I/O module,power supplies, and SAS/SATA (hot-swap hard disk drive or solid state drive)backplanesv Wake on LAN capabilityChapter 1. The IBM System x3850 X6 and x3950 X6 Types 3837 and 3839 server 19
