806f000f-220101ff The System [ComputerSystemElementName] has detected no memory in the system.Explanation: IMM has reported that there is no memory (ABR Status, Firmware Error, Sys Boot Status) in thesystem.May also be shown as 806f000f220101ff or 0x806f000f220101ffSeverity: ErrorAlert Category: Critical - MemoryServiceable: YesCIM Information: Prefix: PLAT and ID: 0794SNMP Trap ID: 41Automatically notify Support: NoUser response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the loggedIMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Centerfor the appropriate user response.Related Links:v “Finding the UEFI (POST) error code” on page 1666806f000f-220102ff Subsystem [MemoryElementName] has insufficient memory for operation.Explanation: IMM has reported that the usable Memory is insufficient for operation. (ABR Status, Firmware Error,Sys Boot Status)May also be shown as 806f000f220102ff or 0x806f000f220102ffSeverity: ErrorAlert Category: Critical - MemoryServiceable: YesCIM Information: Prefix: PLAT and ID: 0132SNMP Trap ID: 41Automatically notify Support: NoUser response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the loggedIMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Centerfor the appropriate user response.806f000f-220103ff The System [ComputerSystemElementName] encountered firmware error - unrecoverable bootdevice failure.Explanation: IMM has reported that System Firmware Error Unrecoverable boot device failure has occurred. (ABRStatus, Firmware Error, Sys Boot Status)May also be shown as 806f000f220103ff or 0x806f000f220103ffSeverity: ErrorAlert Category: Critical - Hard Disk driveServiceable: YesCIM Information: Prefix: PLAT and ID: 0770SNMP Trap ID: 5Automatically notify Support: NoUser response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the loggedIMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Centerfor the appropriate user response.806f000f-220101ff • 806f000f-220103ffAppendix B. Integrated management module II (IMM2) error messages 627
