Addr. Name Type Start value Current value Comment4.0 Object(1).Index WORD6.0 Object(1).Subindex BYTE7.0 Object(1).Write_Length BYTE8.0 Object(1).Data_Write DWORD12.0 Object(1).Data_Read DWORD16.0 Object(1).State BYTE18.0 Object(2).Group WORD 2. Object... ... ...34.0 Object(2).State BYTE36.0 Object(3).Group WORD 3. Object... ... ...52.0 Object(3).State BYTE... ... ... ...12.4 RAM to WLD - "WLD"12.4.1 FB 240 - RAM_to_s7prog.wld - RAM to s7prog.wldWith REQ = TRUE this block copies the currently loaded project of a CPU on an insertedmemory card as s7prog.wld. With a SPEED7 CPU from VIPA the s7prog.wld is automati-cally read from an inserted memory card always after an overall reset. The FB 240 inter-nally calls the block SFB 239 with the corresponding parameters. Here the values ofBUSY and RET_VAL are returned from the SFB 239 to the FB 240.Please note that this block is not part of the library for the Siemens TIAPortal.ParametersParameter Declaration Data type Memory area DescriptionREQ IN BOOL I, Q, M, D, L Function request with REQ = 1BUSY OUT BOOL I, Q, M, D, L Return value of the SFB 239RET_VAL OUT WORD I, Q, M, D, L Return value of the SFB 23912.4.2 FB 241 - RAM_to_autoload.wld - RAM to autoload.wldWith REQ = TRUE this block copies the currently loaded project of a CPU on an insertedmemory card as autoload.wld. With a SPEED7 CPU from VIPA the s7prog.wld is auto-matically read from an inserted memory card always after PowerON. The FB 241 inter-nally calls the block SFB 239 with the corresponding parameters. Here the values ofBUSY and RET_VAL are returned from the SFB 239 to the FB 241.DescriptionDescriptionVIPA SPEED7Device SpecificRAM to WLD - "WLD" > FB 241 - RAM_to_autoload.wld - RAM to autoload.wldHB00 | OPL_SP7 | Operation list | en | 18-30280
