Value Description80D3h The SDB cannot be accessed since it does not exist.80D4h Bad SDB structure: the SDB internal pointer points to an element outside of the SDB.14.1.45 SFC 57 - PARM_MOD - Parameterize moduleThe SFC 57 PARM_MOD (parameterize module) transfers all the records that were con-figured in the respective SDB into a module, irrespective of whether the specific record isstatic or dynamic.These SFC can be used for digital-, analog modules, FMs, CPs and via PROFIBUS DP-V1.ParametersParameter Declaration Data type Memory block DescriptionREQ INPUT BOOL I, Q, M, D, L,constantREQ = 1: write requestIOID INPUT BYTE I, Q, M, D, L,constantIdentifier for the address space:54h = peripheral input (PI)55h = peripheral output (PQ)For hybrid modules the SFC returns the areaidentifier of the lower address. When theaddresses are equal the SFC returns identifier54h.LADDR INPUT WORD I, Q, M, D, L,constantLogical base address of the module. For hybridmodules the lower of the two addresses must bespecified.RET_VAL OUTPUT INT I, Q, M, D, L The return value contains an error code if anerror is detected when the function is being pro-cessed.BUSY OUTPUT BOOL I, Q, M, D, L BUSY = 1: the write operation has not beencompleted.DescriptionVIPA SPEED7Integrated StandardSystem Functions > SFC 57 - PARM_MOD - Parameterize moduleHB00 | OPL_SP7 | Operation list | en | 18-30696
