Value Description06h defined page frame does not exist07h parameter SIZE ¹ 1, 2 or 4 at read access08h parameter SIZE ¹ 1, 2 or 4 at write access09h parameter R_W is ¹ 0 or 116.1.2 SFC 230 ... 238 - Page frame communication16.1.2.1 Parameter descriptionThe handling blocks allow the deployment of communication processors in the CPUsfrom VIPA. The handling blocks control the complete data transfer between CPU and theCPs. Advantages of the handling blocks:n you loose only few memory space for user applicationn short runtimes of the blocksThe handling blocks don't need:n bit memory arean time areasn counter areasAll handling blocks described in the following use an identical interface to the user appli-cation with these parameters:SSNR - Interface numberANR - Order numberANZW - Indicator word (double word)IND - Indirect fixing of the relative start address of the data source res. destina-tionQANF/ZANF - Relative start address within the typePAFE - Parameterization errorBLGR - Block sizeInterface numbern Number of the logical interface (page frame address) to which the according orderrefers to.– Parameter type: Integer– Convenient range: 0 ... 255Job numbern The called job number for the logical interface.– Parameter type: Integer– Convenient range: 1 ... 223OverviewSSNRANRVIPA SPEED7 System BlocksFetch/Write Communication > SFC 230 ... 238 - Page frame communicationHB00 | OPL_SP7 | Operation list | en | 18-30 885
