IM3 area 0 to 255 P area 512 to 767IM4 area 0 to 255 P area 768 to 1023DB 0 to 255 DB 0 to 255DX 0 to 255 DB 256 to 511M 0 to 199 M 0 to 199S Error message: "Invalid range"n A process image of the S5 I/O areas P/Q/IM3/IM4 is made in the S7 I/O area. Youmust assign the I/O area in the configuration table.This function is only used to convert the FB196 of an existing S5 programof an S5 CPU 95U, 103, 941 to 944, 945, 928B, 948 to a function of anS7 program for the S7-300/400 programmable controller.15.1.14 FC 111 - PER_ET2 - Read/Write Ext. Per. 2The function PER_ET2 (Reading and Writing for Expanded Peripheries) transfers either aperipheral area into a CPU-internal area or vice-versa (depending on the parameterassignment). In this way, input bytes can be read from, and output bytes written to, theexpanded I/O. If a data block is selected as an internal area, the block must have beenset up by the user with the necessary length prior to calling up the function.n The PBIB parameter (defined in DB)– In S7, the I/O area is assigned values as follows:S5 S7P area 0 to 255 P area 0 to 255Q area 0 to 255 P area 256 to 511IM3 area 0 to 255 P area 512 to 767IM4 area 0 to 255 P area 768 to 1023DB 0 to 255 DB 0 to 255DX 0 to 255 DB 256 to 511M 0 to 199 M 0 to 199S Error message: "Invalid range"n A process image of the S5 I/O areas P/Q/IM3/IM4 is made in the S7 I/O area. Youmust assign the I/O area in the configuration table.This function is only used to convert the FB197 of an existing S5 programof an S5 CPU 95U, 103, 941 to 944, 945, 928B, 948 to a function of anS7 program for the S7-300/400 programmable controller.DescriptionDifferences between S5and S7:VIPA SPEED7StandardConverting > FC 111 - PER_ET2 - Read/Write Ext. Per. 2HB00 | OPL_SP7 | Operation list | en | 18-30804
