Parameter Declaration Data Type Memory Area DescriptionID INPUT DWORD I, Q, M, D, L,constantn Low word: logical address of the DPslave/PROFINET IO component(module or submodule)n High word: irrelevantOFFSET INPUT INT I, Q, M, D, L,constantNumber of the first byte to be written in theprocess image for the component(smallest possible value: 0)LEN INPUT INT I, Q, M, D, L,constantAmount of bytes to be writtenSTATUS OUTPUT DWORD I, Q, M, D Contains error information for SFC 81UBLKMOV in the form DW#16#40xxxx00 ifERROR = TRUEERROR OUTPUT BOOL I, Q, M, D Error display:ERROR = TRUE if an error occurs whencalling SFC 81 UBLKMOV.OUTPUTS IN_OUT ANY I, Q, M, D Source area for the data to be written:n If the source area is smaller than LEN,then as many bytes as OUTPUTS con-tains are transferred. ERROR receivesthe value FALSE.n If the source area is greater than LEN,then the first LEN bytes are transferredfrom OUTPUTS. ERROR receives thevalue FALSE.Please refer to SFC 81 - UBLKMOV - Copy data area without gaps.Ä 72015.4 S5 Converting15.4.1 FC 112 - Sine(x) - SineThe function FC 112 expects the input value in ACCU 1 as a floating point number.1. The input value must be within the range between zero(REAL = +0.0000000e+00) ... 2 x p (REAL = +0.6283185e+01)2. The function also stores the result in ACCU 1 as a floating point number.3. The input value DWORD = DW#16#0000 0000 is treated the same way as thefloating point value zero (REAL = +0.0000000e+00 in accordance with DWORD =DW#16#8000 0000).ð If the calculation is carried out correctly, the RLO ENO is FALSE after the func-tion has been called up.Error InformationDescriptionVIPA SPEED7 StandardS5 Converting > FC 112 - Sine(x) - SineHB00 | OPL_SP7 | Operation list | en | 18-30 825
