The source and target field must not overlap.If the specified target field is larger than the source field, only the amountof data located in the source field will be copied into the target field.However, if the size of the specified target field is less than the size of thesource field, then only the amount of data that will fit into the target fieldwill be copied.If the data type of the ANY-pointer (source or target) is BOOL, then thespecified length must be divisible by 8, otherwise the SFC will not be exe-cuted.If the data type of the ANY-pointer is STRING the specified length mustbe 1.Value Description0000h no error8091h The source area is located in a data block that is not relevant to execution.14.1.57 SFC 101 - RTM - Handling Runtime metersCall SFC 101 RTM (runtime meter) to set, start, stop and read a 32-bit runtime meter ofyour CPU. To fetch the values of all 32-bit runtime meters of your CPU, call SFC 51RDSYSST with SZL_ID=W#16#0132 and INDEX=W#16#000B (for runtime meters 0 …7) or INDEX=W#16#000C (for runtime meters 8 … 15).Parameter Deklaration Datentyp Speicherber-eichBeschreibungNR INPUT BYTE I, Q, M, D, L,constantNumber of the runtime meterNumbering starts at 0. You will find the number ofruntime meters of your CPU in the technical spec-ifications.MODE INPUT BYTE I, Q, M, D, L,constantJob ID:n 0: fetch (the status is then written to CQ andthe current value to CV). After the runtimemeter has reached (2E31) -1 hours, it stops atthe highest value that can be displayed andoutputs an "Overflow" error message.n 1: start (at the last counter value)n 2: stopn 4: set (to the value specified in PV)n 5: set (to the value specified in PV) and thenstartn 6: set (to the value specified in PV) and thenstopPV INPUT DINT I, Q, M, D, L,constantNew value for the runtime meterRET_VAL (Return value)DescriptionParametersVIPA SPEED7 Integrated StandardSystem Functions > SFC 101 - RTM - Handling Runtime metersHB00 | OPL_SP7 | Operation list | en | 18-30 721
