Code Description0xxxh 0 = OK, 0xxx = Length of read data7000h REQ = 0, BUSY = 0 (nothing present)7001h REQ = 1, 1. call7002h Block is executed8010h Pointer in DATA has type BOOL8011h Pointer in DATA cannot be decoded (e.g. DB not loaded)8012h Data length exceeds 512byte8013h A write access to a write-protected DB happened8100h The defined HANDLE is not valid9001h For this HANDLE no file is opened.9002h Another function has been called via this HANDLE and is ready9003h Another function has been called via this HANDLE and is not readyA000h System internal error occurredA003h Internal errorA100h General file system error (e.g. no memory card plugged)16.3.7 FC/SFC 212 - FILE_WR - Write fileUse this block for write access to the memory card. This writes data from the position andlength of the CPU defined under DATA to the memory card via the according HANDLEstarting at the write/read position. During every call you may transfer a max. of 512byte.REQ = 1 initializes the function.ParametersParameter Declaration Data type DescriptionREQ IN BOOL Activate functionHANDLE IN INT Index of file 0 ... 3DescriptionVIPA SPEED7System BlocksFile Functions SPEED7 CPUs > FC/SFC 212 - FILE_WR - Write fileHB00 | OPL_SP7 | Operation list | en | 18-30916
