13.4.6 Usage in Siemens TIA Portal13.4.6.1 Preconditionn Please use the Siemens TIA Portal V 14 and up for the configuration.n The configuration of the VIPA CPU with PWM functionality happens in the SiemensTIA Portal by means of a virtual PROFINET IO device.n The PROFINET IO Device is to be installed in the hardware catalog by means of aGSDML.The installation of the PROFINET VIPA IO device happens in the hardware catalog withthe following approach:1. Go to the service area of www.vipa.com.2. Download the according file for your system - here System MICRO from the down-load area via ‘Config files è PROFINET’.3. Extract the file into your working directory.4. Start the Siemens TIA Portal.5. Close all the projects.6. Switch to the Project view.7. Select ‘Options è Install general station description file (GSD)’.8. Navigate to your working directory and install the according GSDML file.ð After the installation the hardware catalog is refreshed and the Siemens TIAPortal is closed.After restarting the Siemens TIA Portal the according PROFINET IO device canbe found at Other field devices > PROFINET > IO > VIPA GmbH > VIPA MICROPLC.Thus, the VIPA components can be displayed, you have to deactivate the"Filter" of the hardware catalog.13.4.6.2 Hardware configurationTo be compatible with the Siemens SIMATIC TIA Portal the following steps should beexecuted:1. Start the Siemens TIA Portal with a new project.2. Switch to the Project view.3. Click in the Project tree at ‘Add new device’ .OverviewInstalling the VIPA IOdeviceAdd CPU in the projectVIPA SPEED7 Motion control - Simple Motion Control LibraryUsage inverter drive via PWM > Usage in Siemens TIA PortalHB00 | OPL_SP7 | Operation list | en | 18-30 443
