Eaton Scantronic i-on10 Configuration Manual

Also see for Scantronic i-on10: Installation instructions

Configuring the System − Getting StartedPage 20 If the lid of the control unit is open, you will see:14. If the standby screen is displayed, enter the installer menu (as described in the nextsection). Otherwise, if the "Panel lid open" message is displayed, press  to accessthe Installer menu.15. Carry out the required configuration tasks in the Installer menu; for example, to: Add the other keypads, if used (page 33). Program zones. Configure the auxiliary output (if used). Configure setting options.Entering the Installer menuEntering the Installer menu allows you to configure the system using the options provided.You cannot enter the Installer menu if the system is set.While you are logged in: The system will not generate alarms. You are, for example, able to open the lid ofthe control unit without generating an alarm. All Hold-Up Alarms (HUAs), fire-alarmzones, 24-hour zones and tampers are disabled. Any other user trying to set the system from a keypad or access the user menu willsee the message “Installer on Site”.To enter the Installer menu:1. Make sure the system is fully unset and showing the standby screen. For example:2. Enter the Installer code, as specified when the control unit was first configured:Note: Only one user can be logged in at any one time. If you or another user islogged in at another keypad, you will see "System Busy".3. You may be prompted to enter a user code:This is displayed if you have not used the Installer menu with the previous 30minutes, or if the system has been armed and disarmed within that period. You candisable this feature using System Options – User Options – User Access – UserCode Required (see page 48). You cannot enter a Set Only user code.4. The bottom line displays Detectors/Devices, which is the first option in the menu:Refer to the next section for details of how to use the user interface.