IP Services Commands 157Nortel WLAN—Security Switch 2300 Series Command Line ReferenceSee Also set interface dhcp-client on page 110show dhcp-serverDisplays WSS Software DHCP server information.Syntax show dhcp-server [interface vlan-id] [verbose]Defaults None.Access All.History Introduced in WSS Software Version 4.0.Examples The following command displays the addresses leased by the WSS Software DHCP server:WSS# show dhcp-serverVLAN Name Address MAC Lease Remaining (sec)---- -------------- --------------- ----------------- --------------------1 default 10.10.20.2 00:01:02:03:04:05 123451 default 10.10.20.3 00:01:03:04:06:07 21032 red-vlan 192.168.1.5 00:01:03:04:06:08 1022 red-vlan 192.168.1.7 00:01:03:04:06:09 16789The following command displays configuration and status information for each VLAN on which the DHCP server isconfigured:WSS# show dhcp-server verboseInterface: 0 (Direct AP)Status: UPAddress Range: 10.0.0.1-10.0.0.253Interface: default(1)Status: UPAddress Range: 10.10.20.2-10.10.20.254Hardware Address: 00:01:02:03:04:05State: BOUNDLease Allocation: 43200 secondsLease Remaining: 12345 secondsIP Address: 10.10.20.2Subnet Mask: 255.255.255.0Default Router: 10.10.20.1DNS Servers: 10.10.20.4 10.10.20.5DNS Domain Name: mycorp.comTable 19 and Table 20 describe the fields in these displays.interface vlan-id Displays the IP addresses leased by the specified VLAN.verbose Displays configuration and status information for the WSS SoftwareDHCP server.
