VLAN Commands 91Nortel WLAN—Security Switch 2300 Series Command Line ReferenceThe following command adds port 16 to VLAN beige and assigns tag value 86 to the port:WSS# set vlan beige port 16 tag 86success: change accepted.See Also• clear vlan on page 76• set vlan name on page 79• show vlan config on page 89set vlan tunnel-affinityChanges a WSS’s preferability within a mobility domain for tunneling user traffic for a VLAN. When a user roams to aWSS that is not a member of the user’s VLAN, the switch can forward the user traffic by tunneling to another WSS thatis a member of the VLAN.Syntax set vlan vlan-id tunnel-affinity numDefaults Each VLAN on a WSS’s network ports has an affinity value of 5 by default.Access Enabled.Usage Increasing a switch’s affinity value increases the switch’s preferability for forwarding user traffic forthe VLAN.If more than one WSS has the highest affinity value, WSS Software randomly selects one of the switches for the tunnel.Examples The following command changes the VLAN affinity for VLAN beige to 10:WSS# set vlan beige tunnel-affinity 10success: change accepted.See Also• show roaming vlan on page 85• show vlan config on page 89show fdbDisplays entries in the forwarding database.Syntax show fdb [mac-addr-wildcard [vlan vlan-id]]show fdb {perm | static | dynamic | system | all} [port port-list | vlan vlan-id]vlan-id VLAN name or number.num Preference of this switch for forwarding user traffic for the VLAN. Youcan specify a value from 1 through 10. A higher number indicates agreater preference.
