236 Network Domain CommandsNN47250-100 (Version 02.51)See Also• set network-domain mode member seed-ip on page 227• set network-domain peer on page 228• set network-domain mode seed domain-name on page 229clear network-domain modeRemoves the Network Domain seed or member configuration from the WSS.Syntax clear network-domain mode {seed | member}Defaults None.Access Enabled.History Introduced in WSS Software 4.1.Usage This command has no effect if the WSS is not configured as part of a Network Domain.Examples The following command clears the Network Domain member configuration from theWSS:23x0# clear network-domain mode membersuccess: change accepted.The following command clears the Network Domain seed configuration from the WSS:23x0# clear network-domain mode seedsuccess: change accepted.See Also• set network-domain mode member seed-ip on page 227• set network-domain mode seed domain-name on page 229clear network-domain peerRemoves the configuration of a Network Domain peer from a WSS configured as a Network Domain seed.Syntax clear network-domain peer {ip-addr | all}seed Clears the Network Domain seed configuration from the WSS.member Clears the Network Domain member configuration from the WSS.ip-addr IP address of the Network Domain peer in dotted decimal notation.all Clears the Network Domain peer configuration for all peers from theWSS.
