516 802.1X Management CommandsNN47250-100 (Version 02.51)See Also• clear dot1x timeout auth-server on page 498• show dot1x on page 507set dot1x tx-periodSets the number of seconds that must elapse before the WSS retransmits an EAPoL packet.Syntax set dot1x tx-period secondsDefaults The default is 5 seconds.Access Enabled.History Introduced in WSS Software 1.0.Examples Type the following command to set the number of seconds before the WSS retransmitsan EAPoL packet to 300:WSS# set dot1x tx-period 300success: dot1x tx-period set to 300.See Also• clear dot1x tx-period on page 499• show dot1x on page 507set dot1x wep-rekeyEnables or disables Wired Equivalency Privacy (WEP) rekeying for broadcast and multicast encryption keys.Syntax set dot1X wep-rekey {enable | disable}Defaults WEP key rotation is enabled, by default.Access Enabled.History Introduced in WSS Software 1.0.seconds Specify a value between 1 and 65,535.enable Causes the broadcast and multicast keys for WEP to be rotated at aninterval set by the set dot1x wep-rekey-period for each radio, associatedVLAN, and encryption type. The WSS generates the new broadcast andmulticast keys and pushes the keys to the clients via EAPoL keymessages.disable WEP broadcast and multicast keys are never rotated.
