300 AP CommandsNN47250-100 (Version 02.51)set radio-profile long-retryDeprecated in WSS Software Version 4.1. In 4.1, this parameter is associated with service profiles instead ofradio profiles. See set service-profile long-retry-count on page 319.set radio-profile max-rx-lifetimeChanges the maximum receive threshold for the AP radios in a radio profile. The maximum receive thresholdspecifies the number of milliseconds that a frame received by a radio can remain in buffer memory.Syntax set radio-profile name max-rx-lifetime timeDefaults The default maximum receive threshold for AP radios is 2000 ms (2 seconds).Access Enabled.Usage You must disable all radios that are using a radio profile before you can change parametersin the profile. Use the set radio-profile mode command .Examples The following command changes the maximum receive threshold for radio profile rp1to 4000 ms:WSS# set radio-profile rp1 max-rx-lifetime 4000success: change accepted.See Also• set radio-profile mode on page 291• set radio-profile max-tx-lifetime on page 290• show radio-profile on page 376set radio-profile max-tx-lifetimeChanges the maximum transmit threshold for the AP radios in a radio profile. The maximum transmitthreshold specifies the number of milliseconds that a frame scheduled to be transmitted by a radio can remainin buffer memory.Syntax set radio-profile name max-tx-lifetime timename Radio profile name.time Number of milliseconds. You can enter a value from 500 (0.5 second)through 250,000 (250 seconds).name Radio profile name.time Number of milliseconds. You can enter a value from 500 (0.5 second)through 250,000 (250 seconds).
