235Nortel WLAN—Security Switch 2300 Series Command Line ReferenceNetwork Domain CommandsUse Network Domain commands to configure and manage Network Domain groups.A Network Domain is a group of geographically dispersed Mobility Domains that share information among themselvesover a WAN link. This shared information allows a user configured on a WSS in one Mobility Domain to establishconnectivity on a WSS in another Mobility Domain elsewhere in the same Network Domain. The WSS forwards theuser traffic by creating a VLAN tunnel to a WSS in the remote Mobility Domain.In a Network Domain, one or more WSSs serve as a seed switch. At least one of the Network Domain seeds maintains aconnection with each of the member WSSs in the Network Domain. The Network Domain seeds share information aboutthe VLANs configured on their members, so that all the Network Domain seeds have a common database of VLANinformation.This chapter presents Network Domain commands alphabetically. Use the following table to locate commands in thischapter based on their use.clear network-domainClears all Network Domain configuration and information from a WSS, regardless of whether the WSS is a seed or amember of a Network Domain.Syntax clear network-domainDefaults None.Access Enabled.History Introduced in WSS Software 4.1.Usage This command has no effect if the WSS is not configured as part of a Network Domain.Examples To clear a Network Domain from a WSS within the domain, type the following command:23x0# clear network-domainThis will clear all network-domain configuration. Would you like to continue? (y/n) [n] ysuccess: change accepted.Network Domain set network-domain mode seed domain-name on page 229set network-domain mode member seed-ip on page 227set network-domain peer on page 228show network-domain on page 229clear network-domain on page 225clear network-domain mode on page 226clear network-domain peer on page 226clear network-domain seed-ip on page 227
