RF Detection Commands 525Nortel WLAN—Security Switch 2300 Series Command Line ReferenceExamples The following command adds MAC address aa:bb:cc:44:55:66 to the attack list:WSS# set rfdetect attack-list 11:22:33:44:55:66success: MAC 11:22:33:44:55:66 is now in attacklist.See Also• clear rfdetect attack-list on page 512• show rfdetect attack-list on page 519• set radio-profile countermeasures on page 287set rfdetect black-listAdds an entry to the client black list. The client black list specifies clients that are not allowed on the network. WSSSoftware drops all packets from the clients on the black list.Syntax set rfdetect black-list mac-addrDefaults The client black list is empty by default.Access Enabled.History Introduced in WSS Software Version 4.0.Usage In addition to manually configured entries, the list can contain entries added by WSS Software. WSSSoftware can place a client in the black list due to an association, reassociation or disassociation flood from theclient.The client black list applies only to the WSS on which the list is configured. WSSs do not share client black lists.Examples The following command adds client MAC address 11:22:33:44:55:66 to the black list:WSS# set rfdetect black-list 11:22:33:44:55:66success: MAC 11:22:33:44:55:66 is now blacklisted.See Also• set rfdetect black-list on page 515• show rfdetect black-list on page 519set rfdetect ignoreConfigures a list of known devices to ignore during an RF scan. WSS Software does not generate log messages or trapsfor the devices in the ignore list.Syntax set rfdetect ignore mac-addrmac-addr MAC address you want to place on the black list.mac-addr BSSID (MAC address) of the device to ignore.
