70 System Services CommandsNN47250-100 (Version 02.51)• Number sign (#)• Question mark (?)• Single quotation mark (')Examples To create a banner that says Update meeting at 3 p.m., type the following command:WSS# set banner motd ^Update meeting at 3 p.m.^success: change accepted.See Also• clear banner motd on page 54• show banner motd on page 67set confirmEnables or disables the display of confirmation messages for commands that might have a large impact on thenetwork.Syntax set confirm {on | off}Defaults Configuration messages are enabled.Access Enabled.Usage This command remains in effect for the duration of the session, until you enter an exit orquit command, or until you enter another set confirm command.WSS Software displays a message requiring confirmation when you enter certain commands that can have apotentially large impact on the network. For example:WSS# clear vlan redThis may disrupt user connectivity. Do you wish to continue? (y/n) [n]Examples To turn off these confirmation messages, type the following command:WSS# set confirm offsuccess: Confirm state is offset lengthDefines the number of lines of CLI output to display between paging prompts. WSS Software displays the setnumber of lines and waits for you to press any key to display another set, or type q to quit the display.on Enables confirmation messages.off Disables confirmation messages.
