342 AP CommandsNN47250-100 (Version 02.51)Examples The following command applies the name guest to the SSID managed by serviceprofile clear_wlan:WSS# set service-profile clear_wlan ssid-name guestsuccess: change accepted.The following command applies the name corporate users to the SSID managed by service profilemycorp_srvcprf:WSS# set service-profile mycorp_srvcprf ssid-name “corporate users”success: change accepted.See Also• set service-profile ssid-type on page 332• show service-profile on page 380set service-profile ssid-typeSpecifies whether the SSID managed by a service profile is encrypted or unencrypted.Syntax set service-profile name ssid-type [clear | crypto]Defaults The default SSID type is crypto.Access Enabled.History Introduced in WSS Software Version 3.0.Examples The following command changes the SSID type for service profile clear_wlan toclear:WSS# set service-profile clear_wlan ssid-type clearsuccess: change accepted.See Also• set service-profile ssid-name on page 331• show service-profile on page 380set service-profile static-cosEnables or disables static CoS on a service profile. Static CoS assigns the same CoS level to all traffic on theservice profile’s SSID, regardless of 802.1p or DSCP markings in the packets themselves, and regardless ofname Service profile name.clear Wireless traffic for the service profile’s SSID is not encrypted.crypto Wireless traffic for the service profile’s SSID is encrypted.
