386 AP CommandsNN47250-100 (Version 02.51)Examples The following command displays information about the AP radios that are in the same group asradio 1 on AP 3:WSS# show load-balancing group ap 3 radio 1Radios in the same load-balancing group as: ap3/radio1--------------------------------------------------IP address AP Radio Overlap------------------ ---- ----- -------10.2.28.200 3 1 100/100The following command displays information about RF load balancing group blue:WSS# show load-balancing group blueLoad-balancing group: blueIP address AP Radio Clients------------------ ---- ----- -------10.2.28.200 3 1 0Table 55 describes the fields in displayed by the show load-balancing group command.See Also• set load-balancing strictness on page 277• set ap radio load-balancing on page 268• set ap local-switching mode on page 260show radio-profileDisplays radio profile information.Syntax show radio-profile {name | ?}Table 22: Output for show load-balancing groupField DescriptionIP address The IP address of the AP in the load-balancing group.AP AP numberRadio Radio numberOverlap The amount of overlapping coverage area the specified AP radiohas with the AP radio in the list. An overlap of 100/100 indicatesthat the AP radios have exactly the same coverage area.Clients The current client load on the AP radio.name Displays information about the named radio profile.? Displays a list of radio profiles.
