530 RF Detection CommandsNN47250-100 (Version 02.51)• set rfdetect black-list on page 515show rfdetect clientsDisplays the wireless clients detected by a WSS.Syntax show rfdetect clients [mac mac-addr]Defaults None.Access Enabled.History Introduced in WSS Software Version 4.0.Examples The following command shows information about all wireless clients detected by a WSS’s APs:WSS# show rfdetect clientsTotal number of entries: 30Client MAC Client AP MAC AP Port/Radio NoL Type LastVendor Vendor /Channel seen----------------- ------------------------ ------- ------------- ------------------ ------- -----00:03:7f:bf:16:70 Unknown Unknown ap 1/1/6 1 intfr 20700:04:23:77:e6:e5 Intel Unknown ap 1/1/2 1 intfr 15500:05:5d:79:ce:0f D-Link Unknown ap 1/1/149 1 intfr 8700:05:5d:7e:96:a7 D-Link Unknown ap 1/1/149 1 intfr 11700:05:5d:7e:96:ce D-Link Unknown ap 1/1/157 1 intfr 16200:05:5d:84:d1:c5 D-Link Unknown ap 1/1/1 1 intfr 52The following command displays more details about a specific client:WSS# show rfdetect clients mac 00:0c:41:63:fd:6dClient Mac Address: 00:0c:41:63:fd:6d, Vendor: LinksysPort: ap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84Bssid: 00:0b:0e:01:02:00, Vendor: Nortel, Type: intfr, Dst: ff:ff:ff:ff:ff:ffLast Rogue Status Check (secs ago): 3The first line lists information for the client. The other lines list information about the most recent 802.11 packetdetected from the client.Table 77 and Table 78 describe the fields in these displays.mac mac-addr Displays detailed information for a specific client.Table 1: show rfdetect clients OutputField DescriptionClient MAC MAC address of the client.Client Vendor Company that manufactures or sells the client.AP MAC MAC address of the radio with which the rogue client isassociated.
