AP Commands 253Nortel WLAN—Security Switch 2300 Series Command Line ReferenceHistoryUsage If you specify a parameter, the setting for the parameter is reset to its default value. The settings ofthe other parameters are unchanged and the radio profile remains in the configuration. If you do not specify aparameter, the entire radio profile is deleted from the configuration. All radios that use this profile must bedisabled before you can delete the profile.Examples The following commands disable the radios that are using radio profile rp1 and reset thebeaconed-interval parameter to its default value:WSS# set radio-profile rp1 mode disableWSS# clear radio-profile rp1 beacon-intervalsuccess: change accepted.The following commands disable the radios that are using radio profile rptest and remove the profile:WSS# set radio-profile rptest mode disableWSS# clear radio-profile rptestsuccess: change accepted.See Also• set ap radio radio-profile on page 271• set radio-profile mode on page 291• show ap config on page 344• show radio-profile on page 376clear service-profileRemoves a service profile or resets one of the profile’s parameters to its default value.Syntax clear service-profile name[soda {agent-directory | failure-page | remediation-acl | success-page | logout-page}]Version 4.1 countermeasures parameter added.Version 5.0 Parameters that no longer apply to radio profiles in WSSSoftware Version 4.1 removed:• long-retry• short-retryname Service profile name.soda agent-directory Resets the directory for Sygate On-Demand (SODA)agent files to the default directory. By default, thedirectory name for SODA agent files is the same as theservice profile name.
