AP Commands 341Nortel WLAN—Security Switch 2300 Series Command Line ReferenceAccess Enabled.History Introduced in WSS Software Version 4.1.Usage Use this command to specify a custom page that is loaded by the client when it passes thechecks performed by the SODA agent. After this page is loaded, the client is placed in its assignedVLAN and granted access to the network.The page is assumed to reside in the root directory on the WSS. You can optionally specify a differentdirectory where the page resides.This functionality occurs only when the enforce checks option is enabled for the service profile. The enforcechecks option is enabled by default.Examples The following command specifies success.html, which resides in the root directory onthe WSS, as the page to load when a client passes the SODA agent checks:WSS# set service-profile sp1 soda success-page success.htmlsuccess: change accepted.The following command specifies success.html, which resides in the soda-files directory on the WSS, as thepage to load when a client passes the SODA agent checks:WSS# set service-profile sp1 soda success-page soda-files/success.htmlsuccess: change accepted.See Also• set service-profile soda enforce-checks on page 326• set service-profile soda mode on page 329• show service-profile on page 380set service-profile ssid-nameConfigures the SSID name in a service profile.Syntax set service-profile name ssid-name ssid-nameDefaults The default SSID type is crypto (encrypted) and the default name is trapeze.Access Enabled.Historyname Service profile name.ssid-name Name of up to 32 alphanumeric characters.You can include blank spaces in the name, if you delimit the name withsingle or double quotation marks. You must use the same type ofquotation mark (either single or double) on both ends of the string.Version 4.0 Support added for blank spaces in the SSID name.
