Load/Strain (Module G5)68C3 Operations Manual North Atlantic Industries, Inc. 12/19/2014Rev: 2014-12-19-0947 www.naii.com Page 166 of 330Open Status Interrupt EnableSet the bit to enable interrupts for the corresponding channel monitored for Open Detection Status. Whenenabled, a non-compliant channel will trigger an interrupt. Default is 00h to disable all channels.REGISTER D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0Open Status Interrupt Enable X X X X X X X X X X Ch.6 Ch.5 Ch.4 Ch.3 Ch.2 Ch.1BIT Interrupt VectorWhen a BIT Interrupt is enabled and occurs, the contents of BIT Interrupt Vector register is the value that isreported to the user.REGISTER D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 FUNCTIONBIT Interrupt Vector X X X X X X X X D D D D D D D D D=DATA BITOpen Circuit Interrupt VectorWhen an Over-Current Interrupt is enabled and occurs, the contents of Over-Current Interrupt Vector register isthe value that is reported to the user.REGISTER D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 FUNCTIONOpen Circuit Interrupt Vector X X X X X X X X D D D D D D D D D=DATA BIT
