Specifications68C3 Operations Manual North Atlantic Industries, Inc. 12/19/2014Rev: 2014-12-19-0947 www.naii.com Page 42 of 330D/S (Module 6*) –Three Isolated Digital-to-SYN/RSL Ch, 0.25 VA Power Output*See P/N (Applies to each channel unless noted otherwise)Number of Channels: ThreeResolution: 16 bits (.0055°)Accuracy: ± 0.1°Output Format: Synchro or Resolver, galvanic isolation (see part number)Output Load: 0.25 VA @ 90 VL-L, 26 VL-L and 11.8 VL-L(Power reduces linearly as output voltage is reduced)Short circuit protectedOutput Control: Module outputs can be turned ON/OFFRegulation (VL-L): ±5% max. (No load to Full load)Ratio:Rotation:Dual speed, Programmable, Set any ratio between 2 and 255 (CH 1 and 2)Continuous rotation or programmable Start and Stop angles. 0 to 13.6 RPS with aresolution of 0.015/sec. Step size is 16 bits (0.0055)° up to 1.5 RPS, then linearlyincreases to 12 bits (0.088°) at 13.6 RPSReference Input Voltage: Galvanic isolation. Uses 1 ma max/Channel (See part number)Reference Frequency: 47 Hz to 10 KHz (See part number)Phase Shift: 0.5° max. (Between output and reference)Settling Time: Less than 100 microsecondsModule Power: +5VDC @ 30 mA±12VDC @ 190 mA (no-load)(Add 13mA of ±12VDC for every 0.1 VA of output load per channel)Ground: Isolated signal and reference. Channels individually isolated from each other andfrom system groundWeight: 1 oz. (28g)
