February, 20085-4 WorkCentre 5225, 5230Subsystem InformationLaunch VersionParts ListSubsystem InformationUse of the Term “Assembly”The term “assembly” will be used for items in the part number listing that include other itemizedparts in the part number listing. When the word “assembly” is found in the part number listing,there will be a corresponding item number on the illustrations followed by a bracket and alisting of the contents of the assembly.BracketsA bracket is used when an assembly or kit is spared, but is not shown in the illustration. Theitem number of the assembly or kit precedes the bracket; the item numbers of the piece partsfollow the bracket.TagThe notation “W/Tag” in the parts description indicates that the part configuration has beenupdated. Check the change Tag index in the General Information section of the Service Datafor the name and purpose of the modification.In some cases, a part or assembly may be spared in two versions: with the Tag and without theTag. In those cases, use whichever part is appropriate for the configuration of the machine onwhich the part is to be installed. If the machine does not have a particular Tag and the onlyreplacement part available is listed as “W/Tag”, install the Tag kit or all of the piece parts. TheChange Tag Index tells you which kit or piece parts you need.Whenever you install a Tag kit or all the piece parts that make up a Tag, mark the appropriatenumber on the Tag matrix.
