Step Display/Result10. Press to save the setting, or press to return to the previous display without saving changes. Entry Accepted11. The display automatically returns to the parameter display.← →-PRMSET- PRGInit ParametersFWDA1-03= 0 0No InitializeNote: 1. Parameter settings can be edited after entering the correct password.2. Performing a 2-Wire or 3-Wire initialization resets the password to “0000”.n A1-06: Application PresetSeveral Application Presets are available to facilitate drive setup for commonly used applications. Selecting one of theseApplication Presets automatically assigns functions to the input and output terminals and sets a predefined group of parametersto values appropriate for the selected application.In addition, the parameters most likely to be changed are assigned to the group of User Parameters, A2-01 through A2-16.User Parameters are part of the Setup Group, which provides quicker access by eliminating the need to scroll through multiplemenus.u A2: User Parametersn A2-01 to A2-32: User Parameters 1 to 32The user can select up to 32 parameters and assign them to parameters A2-01 through A2-32 to provide quicker access byeliminating the need to scroll through multiple menus. The User Parameter list can also save the most recently editedparameters.No. Parameter Name Setting Range DefaultA2-01 to A2-32 User Parameters 1 to 32 b1-01 to s6–07 Determined byA1-03Saving User ParametersTo save specific parameters to A2-01 through A2-32, set parameter A1-01 to 2 to allow access to all parameters, then enterthe parameter number to one of the A2-oo parameters to assign it to the list of User Parameters. Finally, set A1-01 to 1 torestrict access so users can only set and refer to the parameters saved as User Parameters.n A2-33: User Parameter Automatic SelectionDetermines whether recently edited parameters are saved to the second half of the User Parameters (A2-17 to A2-32) forquicker access.No. Parameter Name Setting Range DefaultA2-33 User Parameter Automatic Selection 0, 1 0Setting 0: Do not save list of recently edited parametersSet A2-33 to 0 to manually select the parameters listed in the User Parameter group.Setting 1: Save list of recently edited parametersSet A2-33 to 1 to automatically save recently edited parameters to A2-17 through A2-32. A total of 16 parameters are savedwith the most recently edited parameter set to A2-17, the second most recently to A2-18, and so on. Access the User Parametersusing the Setup Mode of the digital operator.5.1 A: Initialization146 YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
