Drive Model TerminalRecomm.Gauge WithoutAdditionalImpedance <1>AWG, kcmilRecomm.Gauge WithAdditionalImpedance <2>AWG, kcmilWire RangeAWG, kcmil <3> ScrewSize Tightening TorqueN·m (lb.in.)2o0360R/L1, S/L2 2/0 X 2P 2/0 X 2P up to 250 kcmilM12 32 to 40 (283 to 354)U/T1, V/T2, W/T3 2/0 2/0 up to 250 kcmil⊖, ⊕1 - - up to 250 kcmil⊕3 - - up to 250 kcmil M10 18 to 23 (159 to 204)GND 1 X 2P 1 X 2P up to 250 kcmil M12 32 to 40 (283 to 354)2o0415R/L1, S/L2 3/0 X 2P 3/0 X 2P up to 250 kcmilM12 32 to 40 (283 to 354)U/T1, V/T2, W/T3 3/0 3/0 up to 250 kcmil⊖, ⊕1 - - up to 250 kcmil⊕3 - - up to 250 kcmil M10 18 to 23 (159 to 204)GND 1/0 X 2P 1/0 X 2P up to 250 kcmil M12 32 to 40 (283 to 354)<1> Refer to local codes while selecting wire size for terminals ⊖, ⊕1, ⊕2 if these terminals need to be used for other optional power devices.<2> The wire size recommended for terminal ⊖, ⊕1, ⊕2 is for DC type additional impedance only. See the additional impedance type recommendedin Table A.13 before choosing wire size for terminals ⊖, ⊕1, ⊕2.<3> Terminal wire range is the range of wire sizes the terminals can accept. This information is intended to keep within the wire range of the terminalswhile selecting a wire size for the terminals per local codes for the intended application of these terminals.Table A.17 480 V Single-Phase Main Circuit Wiring and Tightening TorquesDrive Model TerminalRecomm.Gauge WithoutAdditionalImpedance <1>AWG, kcmilRecomm.Gauge WithAdditionalImpedance <2>AWG, kcmilWire RangeAWG, kcmil <3> ScrewSize Tightening TorqueN·m (lb.in.)4o00024o00044o00054o00074o00094o0011R/L1, S/L2 14 14 14 to 10M4 1.2 to 1.5 (10.6 to 13.3)U/T1, V/T2, W/T3 14 14 14 to 10⊖, ⊕1, ⊕2 - 14 14 to 10B1, B2 - - 14 to 10GND 14 14 14 to 104o0018R/L1, S/L2 12 12 12 to 6M4 2.1 to 2.3 (18.6 to 20.4)U/T1, V/T2, W/T3 12 12 12 to 6⊖, ⊕1, ⊕2 - 12 12 to 6B1, B2 - - 12 to 10GND 12 12 12 to 10 M5 2.0 to 2.5 (17.7 to 221.1)4o0023R/L1, S/L2 12 12 12 to 6M4 2.1 to 2.3 (18.6 to 20.4)U/T1, V/T2, W/T3 12 12 12 to 6⊖, ⊕1, ⊕2 - 12 12 to 6B1, B2 - - 12 to 10GND 12 12 12 to 10 M5 2.0 to 2.5 (17.7 to 221.1)4o0031R/L1, S/L2 8 10 10 to 6M5 3.6 to 4.0 (31.8 to 35.4)U/T1, V/T2, W/T3 10 10 10 to 6⊖, ⊕1, ⊕2 - 10 10 to 6B1, B2 - - 10 to 6GND 8 10 10 to 8 M6 5.4 to 6.0 (47.8 to 53.1)4o0038R/L1, S/L2 8 8 10 to 6M5 3.6 to 4.0 (31.8 to 35.4)U/T1, V/T2, W/T3 10 10 10 to 6⊖, ⊕1, ⊕2 - 10 10 to 6B1, B2 - - 10 to 6GND 8 8 10 to 6 M6 5.4 to 6.0 (47.8 to 53.1)A.4 Drive Derating DataYASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual 411A Specifications
