POWR Power unit5-19 69J3D1123. Install the camshaft caps, and thentighten them to the specified torque in theorder shown in the illustration.24. Install the timing chain tensioners B, andthen tighten the bolts to the specifiedtorque in the sequence shown.NOTE:• Install the camshaft caps in the proper posi-tion as shown and with the stamped num-bers facing upside down.• Apply engine oil to the camshaft cap boltsbefore installation.25. Install the driven sprockets, and thentighten the bolts to the specified torque.26. Turn the driven sprockets clockwise andalign “I” marks c and d on the drivensprockets with marks e and f.27. Install the timing belt A, turn the beltfrom the drive sprocket side a half turncounterclockwise to align it, and thenremove the pin 0.T R..Camshaft cap bolt:1st: 8 N·m (0.8 kgf·m, 5.8 ft·lb)2nd: 17 N·m (1.7 kgf·m, 12 ft·lb)Timing chain tensioner bolt:12 N·m (1.2 kgf·m, 8.7 ft·lb)T R. .Driven sprocket bolt:60 N·m (6.0 kgf·m, 43 ft·lb)
