LOWR Lower unit6-41 69J3D11Removing the propeller shafthousing assembly1. Remove the bolts 1, ring 2, and bolts3.2. Pull out the propeller shaft housingassembly.Disassembling the propeller shafthousing1. Remove the spring 1, and then removethe cross pin 2, dog clutch 3, slider shiftplunger, and shift rod joint.2. Remove the forward gear and forwardgear shim(s) from the propeller shafthousing using a press.3. Install the propeller shaft assembly in thereverse direction into the lower case.4. Remove the ring nut 5 and claw washer6.5. Remove the bearing outer race 8, taperroller bearing 9, thrust bearing 0, andpropeller shaft shim(s) A using a press.Slide hammer 4: 90890-06531Puller head 5: 90890-06514ÉS69J6375Bearing separator 4: 90890-06534Ring nut wrench 7: 90890-06578
