69J3D11 6-441234567895. Install the propeller shaft assembly in thereverse direction into the lower case.6. Install the ring nut 0 and claw washerA, and then tighten the ring nut to thespecified torque.7. Install the forward gear B, originalshim(s) C, and dog clutch D using apress.NOTE:Install the dog clutch D with the “F” mark efacing toward the forward gear.CAUTION:Add or remove shim(s), if necessary,when replacing the forward gear or taperroller bearing.8. Install the shift plunger E and slider Finto the propeller shaft, and then installthe cross pin G and spring H.Ring nut wrench 9: 90890-06578Ring nut wrench 9: 90890-06578T R..Ring nut 0:108 N·m (10.8 kgf·m, 78 ft·lb)Ring nut wrench 9: 90890-06578S69J6445Propeller shaft housing (counter rotation model)
