69J3D11 5-221234567895. Disconnect the stator coil couplers 3and pulser coil coupler 4, and removethe blowby hose 5 and stator coilbracket 6.6. Remove the wiring harness guide bolts.NOTE:Move the wiring harness guide 7 to a posi-tion that will make servicing easy.7. Using a hexagon wrench, turn the timingbelt tensioner 8 clockwise to push thetiming belt, increase strength gradually,and then insert a ø5.0 mm (0.2 in) pin 9into the hole g.NOTE:Leave the pin inserted into the timing belttensioner until the timing belt has beeninstalled.8. Remove the timing belt 0 from thedriven sprocket side.9. Check that “I” marks c and d on thedriven sprockets are aligned with markse and f, and that the “ ” mark h onthe plate is aligned with the “ ” mark ion the cylinder block. Align if necessary.10. Install the timing belt A from the drivesprocket side with its part number in theupright position, turn the belt a half turncounterclockwise to align it, and thenremove the pin 9.Power unit
