SPEC Specifications2-7 69J3D11ElectricalItem Unit ModelF225AET FL225AETIgnition and ignition controlsystemIgnition timing(engine idle speed) Degree TDCPulser coil output peak voltage(W/R – B, W/B – B, W/G – B)at cranking (unloaded) V 5.3at cranking (loaded) V 5.3at 1,500 r/min (loaded) V 20at 3,500 r/min (loaded) V 43Pulser coil resistance(*1)(W/R – B, W/B – B, W/G – B)Ω 459–561ECM output peak voltage(B/O – B, B/Y – B, B/W – B)at cranking (loaded) V 252at 1,500 r/min (loaded) V 260at 3,500 r/min (loaded) V 260Spark plug gap mm (in) 11 (0.43)Ignition coil resistancePrimary coil(R/Y – B/O, R/Y – B/Y,R/Y – B/W)Ω 1.5–1.9Secondary coil(spark plug wire –spark plug wire)kΩ 19.6–35.4Throttle position sensor outputvoltage (P – B)mV 695–705Oil pressure sensor outputvoltage (engine idle speed)(O – B)V 3.8Intake air temperature sensorresistanceat 0 °C (32 °F) kΩ 5.4–6.6at 80 °C (176 °F) kΩ 0.29–0.39Engine temperature sensorresistance (B/Y – B)at 20 °C (68 °F) kΩ 54.2–69.0at 100 °C (212 °F) kΩ 3.12–3.48(*1) The figures are for reference only.
