69J3D11 7-44123456789Checking the fuse1. Check the fuse for continuity. Replace ifthere is no continuity.Checking the power trim and tiltrelay1. Check the power trim and tilt relay forcontinuity. Replace if out of specification.NOTE:Be sure to set the measurement range ashown in the illustration when checking forcontinuity.2. Connect the digital circuit tester betweenpower trim and tilt relay terminals 1 and3.3. Connect the light green (Lg) lead to thepositive battery terminal and the black(B) lead to the negative battery terminalas shown.4. Check for continuity between terminals1 and 3. Replace if there is no continu-ity.5. Connect the digital circuit tester betweenpower trim and tilt relay terminals 2 and3.6. Connect the sky blue (Sb) lead to thepositive battery terminal and the black(B) lead to the negative battery terminalas shown.7. Check for continuity between terminals2 and 3. Replace if there is no continu-ity.S69J7525Power trim and tilt relay continuitySky blue (Sb) – Black (B)Light green (Lg) – Black (B) ContinuityTerminal 1 – Terminal 4Terminal 2 – Terminal 4 ContinuityTerminal 1 – Terminal 3Terminal 2 – Terminal 3 No continuityPower trim and tilt electrical system
