69J3D11 6-221234567892. Install the drive shaft housing 1, thrustbearing 2, and original shim(s) 3 to thedrive shaft 4.CAUTION:Add or remove shim(s), if necessary,when replacing the drive shaft housing ordrive shaft.3. Install the drive shaft and drive shafthousing to the lower case, then the pin-ion and pinion nut, and then tighten thenut to the specified torque.NOTE:Install the drive shaft by lifting it up slightly,then aligning it with the pinion and the splineof the drive shaft.4. Tighten the drive shaft housing bolts.Installing the propeller shaft housing1. Install the washer 1 and propeller shaftassembly 2 into the propeller shafthousing assembly 3.2. Apply grease to the new O-rings.3. Install the propeller shaft housing assem-bly into the lower case.4. Install the bolts 4, ring 5, and bolts 6,and then tighten the bolts 4 to the speci-fied torque.Installing the water pump and shiftrod1. Install the shift rod assembly 1.Drive shaft holder 6 5:90890-06520Pinion nut holder 6: 90890-06505Socket adapter 3 7: 90890-06508T R. .Pinion nut:142 N·m (14.2 kgf·m, 103 ft·lb)S69J6275ÉT R..Propeller shaft housing bolt 4:30 N·m (3.0 kgf·m, 22 ft·lb)Drive shaft and lower case (regular rotation model)
