69J3D11 7-141234567892. Install the oil strainer 4 and bolts, andthen tighten the bolts to the specifiedtorque.3. Install the oil pan 5, and then tighten thebolts finger tight.4. Install the exhaust manifold 6 and bolts,and then tighten the bolts finger tight.5. Tighten the exhaust manifold bolts 7,then the oil pan bolts 8, and then tightenthem to the specified torques.6. Install the plate 9.7. Install the cooling water pipe 0 into themuffler A.8. Install the muffler A and bolts into the oilpan, and then tighten the bolts to thespecified torque.9. Install the muffler assembly B by insert-ing the tip of the cooling water pipe Cinto the joint hole a of the upper case.10. Install muffler assembly bolts D and E,and pressure control valve F, and thentighten them to the specified torques.T R..Oil strainer bolt:10 N·m (1.0 kgf·m, 7.2 ft·lb)T R..Exhaust manifold bolt 7:20 N·m (2.0 kgf·m, 14 ft·lb)Oil pan bolt 8:20 N·m (2.0 kgf·m, 14 ft·lb)T R..Muffler bolt:20 N·m (2.0 kgf·m, 14 ft·lb)Upper case, steering arm, swivel bracket and clamp brackets
