LOWR Lower unit6-13 69J3D11Removing the propeller shafthousing assembly1. Remove the bolts 1, ring 2, and bolts3.2. Pull out the propeller shaft housingassembly.Disassembling the propeller shaftassembly1. Remove the spring 1, and then removethe cross pin 2, dog clutch 3, slider 4,shift plunger 5, and shift rod joint 6.Disassembling the propeller shafthousing1. Remove the reverse gear and reversegear shim(s).2. Remove the ball bearing.CAUTION:Do not reuse the bearing, always replaceit with a new one.Bearing housing puller claw L 4:90890-06502Stopper guide plate 5: 90890-06501Center bolt 6: 90890-06504ÉBearing separator 1: 90890-06534Stopper guide plate 2: 90890-06501Stopper guide stand 3:90890-06538Bearing puller 4: 90890-06535Bearing puller claw 1 5:90890-06536Slide hammer 6: 90890-06531Bearing outer race puller 7:90890-06523Outer race puller claw A 8:90890-06532ÉS69J6085É
