69J3D11 6-521234567895. Install the washers 7, wave washer 8,spacer 9, and collar 0 to the drive shaft.NOTE:• The collar and spacer should fit togetherfirmly.• While pulling the drive shaft up, install thecollar with an appropriate tool a that fitsover the drive shaft as shown.6. Install the O-ring A and insert cartridgeB into the pump housing C.NOTE:Align the insert cartridge projections b withthe holes c in the pump housing.7. Install the O-ring D and pump housingassembly E into the lower case, tightenthe bolts F, and then install the seal Gand cover H.NOTE:• When installing the pump housing, applygrease to the inside of the housing, andthen turn the drive shaft clockwise whilepushing down the pump housing.• Align the cover projection d with the holee in the pump housing.Installing the lower unit1. Set the gearshift to the neutral position atthe lower unit.S69J6310AAS69J6315AALT572Drive shaft and lower case (counter rotation model)
